Browsing this Thread:
1 Anonymous Users
|
Re: Efika night build not boot
|
||||
|---|---|---|---|---|
|
Home away from home
 
|
Sorry I was not able to fix anything. I'm afraid this can only be done by somebody actually having the hardware available for quick build and test cycles. Everything else doesn't seem to make sense to me.
ciao
Posted on: 2011/3/31 16:39
|
|||
|
||||
|
Re: Efika night build not boot
|
||||
|---|---|---|---|---|
|
Home away from home
|
So I tested the the night build from March 26, 2011. And here is a report from the serial port.
EFIKA 5K2 Boot Strap [RELEASE BUILD] (c) 2002-2007 bplan GmbH (BUILD 20070122 84240)
And again and again and then I rebooted
......
Posted on: 2011/3/31 9:51
|
|||
|
||||
|
Re: Efika night build not boot
|
||||
|---|---|---|---|---|
|
Home away from home
|
Thanks,
I'll be able to test the about weekend. Then I will know. Thank you again
Posted on: 2011/3/22 18:52
|
|||
|
||||
|
Re: Efika night build not boot
|
||||
|---|---|---|---|---|
|
Home away from home
|
I have tried to fix this now in a similar way I seem to have done for the sam port some time ago. *But* I'm not able to test this on my own due to lack of hardware. Please try the next nightly. I'll start the build right now, so it should be available within the next hours.
If you encounter problems again, highly probable, please post a similar log again. ciao
Posted on: 2011/3/22 18:41
|
|||
|
...
|
||||
|
||||
|
Efika night build not boot
|
||||
|---|---|---|---|---|
|
Home away from home
|
Hello,
I would like to pay my attention to PPC apps, because there are only few of them on AROS. I am using AmiDevCpp for compiling and Efika for testing. However, I cannot start Efika night builds, so theres no other option than using the Michal Schulz?s .pkg packages from 2009 and rest of night builds. That makes the system less stable. Because of this, I would like to ask If theres anyone who could fix this boot error. There is the debug list from 2011-03-15 Thanks EFIKA 5K2 Boot Strap [RELEASE BUILD] (c) 2002-2007 bplan GmbH (BUILD 20070122 84240) Running on CPU PVR: 0x80822014 Running on system SVR: 0x80110022 BIOS Code position: 0xFFF040D0 Setup System Config... [32mDone.[0m Setup Memory Config... [32mDone.[0m Setup PCI... [32mDone.[0m Setup ATA... [32mDone.[0m Setup USB... [32mDone.[0m Setup ETH... [32mDone.[0m Setup AC97... [32mDone.[0m Memory Test skipped (Warmboot detected) cpu0: PowerPC,G2 CPUClock 396 Mhz BUSClock 132 Mhz (Version 0x8082,0x2014) channel 0 unit 0 : ata | IC25N040ATMR04-0 | MO2OAD4A ATA device not present or not responding EMULATION INT HANDLER ENTERED WITH: INT NO: 15 EAX=0003 EBX=1111 ECX=2222 EDX=3333 ESP=0000 EBP=5555 ESI=6666 EDI=7777 AX=4E08 BX=C905 CX=0007 DX=102A SP=6C08 BP=5555 SI=5C57 DI=7777 DS=C000 ES=BAD0 SS=C000 CS=F000 IP=FE15 NV UP -- PL ZR NA PE NC CS:IP = F4 FS=BAD4 GS=BAD5C9F6 C000 0244 3000 0000 01B4 ABC6 0200 UNHANDLED INT 10 FUNCTION 0007 WITHIN EMULATION VM using 1652140 x86 cycles for GFX init [KRN] EFika5200B Kernel build on Mar 15 2011 [KRN] BootMsg @ 019111e4 [KRN] Copying TagList and data [KRN] CmdLine: 'bootdelay=5 ' [KRN] DebugInfo at 00000000 [KRN] Bootstrap loaded debug info for 45 modules [KRN] Debug info uses 163 KB of memory [KRN] Initializing exception handlers [KRN] Initializing MMU [KRN] Location of MMU tables: 07000000-070fffff [KRN] SDR1 = 0700000f [KRN] Flushing TLB [KRN] MBAR at f0000000 [KRN] HID0=0010c000 HID1=40000000 [KRN] Entering ictl_init. [KRN] Stopping all interrupt activities [KRN] Mapping 00003000-06ffffff range for public use [KRN] mmu_map_area(000000003000, 00003000, 06ffd000, 0012) [KRN] Mapping f0000000-f002fffc range for MBAR [KRN] mmu_map_area(0000f0000000, f0000000, 0000c000, 002a) [KRN] Mapping ff100000-ff14dfff range for public read-only access [KRN] mmu_map_area(0000ff100000, 07100000, 0004e000, 0011) [KRN] Mapping ff14e000-ff7f4fff range for supervisor [KRN] mmu_map_area(0000ff14e000, 0714e000, 006a7000, 0010) [KRN] Mapping ff7f5000-ff7fffff range for read-write [KRN] mmu_map_area(0000ff7f5000, 077f5000, 0000b000, 0012) [KRN] Mapping ff800000-ff993fff range for read-only [KRN] mmu_map_area(0000ff800000, 07800000, 00194000, 0013) [KRN] Mapping ff994000-ffffffff range for supervisor [KRN] mmu_map_area(0000ff994000, 07994000, 0066c000, 0010) [KRN] Supervisor mem: 6811KB free [exec] AROS for Efika5200B - The AROS Research OS [exec] Preparing the ExecBase... [exec] ExecBase at 000032c0 [exec] Clearing ExecBase [exec] Initializing library... [exec] Adding memory [exec] Done. SysBase->ThisTask = 00004180 [exec] Resident modules (addr: pri version name): [exec] + 0xff81436c: 127 2 "kernel.resource" [exec] + 0xff815858: 126 41 "exec.library" [exec] + 0xff8d7c9c: 110 41 "expansion.library" [exec] + 0xff88ee54: 104 1 "partition.library" [exec] + 0xff8db120: 103 41 "utility.library" [exec] + 0xff902f8c: 102 41 "aros.library" [exec] + 0xff913830: 102 0 "openfirmware.resource" [exec] + 0xff934368: 100 41 "bootloader.resource" [exec] + 0xff818578: 99 0 "rtas.resource" [exec] + 0xff91683c: 99 2 "processor.resource" [exec] + 0xff897810: 94 42 "oop.library" [exec] + 0xff83a47c: 92 1 "hiddclass.hidd" [exec] + 0xff83796c: 90 2 "pci.hidd" [exec] + 0xff8fff48: 90 1 "i2c.hidd" [exec] + 0xff9179b8: 90 1 "irq.hidd" [exec] + 0xff912520: 89 1 "pci-efika.hidd" [exec] + 0xff84c044: 88 0 "bestcomm.resource" [exec] + 0xff915bc0: 70 41 "battclock.resource" [exec] + 0xff8f5a20: 66 1 "graphics.hidd" [exec] + 0xff887788: 65 41 "graphics.library" [exec] + 0xff856cf4: 60 41 "layers.library" [exec] + 0xff914fbc: 50 41 "timer.device" [exec] + 0xff8448c0: 45 1 "keyboard.hidd" [exec] + 0xff84b660: 45 1 "mouse.hidd" [exec] + 0xff84f204: 44 41 "keyboard.device" [exec] + 0xff8dc9cc: 44 41 "gameport.device" [exec] + 0xff84d42c: 40 41 "keymap.library" [exec] + 0xff902168: 30 41 "input.device" [exec] + 0xff8d4624: 15 50 "intuition.library" [exec] + 0xff8429d8: 4 41 "console.device" [exec] + 0xff93dc78: 4 41 "ata.device" [exec] + 0xff931fe8: -1 1 "radeon.hidd" [exec] + 0xff94fd00: -10 0 "usb.hidd" [exec] + 0xff946620: -15 0 "hid.hidd" [exec] + 0xff964964: -15 0 "storage.hidd" [exec] + 0xff959b1c: -20 0 "ohci.hidd" [exec] + 0xff890ee0: -50 41 "Boot Strap" [exec] + 0xff830b84: -120 41 "dos.library" [exec] + 0xff849b20: -120 44 "workbench.library" [exec] + 0xff8637d4: -122 1 "cdrom.handler" [exec] + 0xff97e920: -122 1 "sfs.handler" [exec] + 0xff989d80: -122 41 "afs.handler" [exec] + 0xff83164c: -123 41 "LDDemon" [exec] + 0xff90944c: -124 41 "con.handler" [exec] + 0xff892ee8: -125 41 "nil.handler" [exec] + 0xff9108dc: -125 1 "amberram.handler" [exec] + 0xff98dd98: -127 1 "fec.device" [exec] + 0xff8fa5bc: -128 41 "dosboot.resource" [exec] InitCode(RTF_SINGLETASK) [KRN] Kernel resource post-exec init. [KRN] Interrupts enabled [KRN] Entered user mode [KRN] Exception 3 (DSI) handler. Context @ ff7fbae8, SysBase @ 000032c0, KernelBase @ 000048ec [KRN] Task 00004180 (exec.library) [KRN] Crash at byte 540 in func Exec_PrepareContext, module aros-efika [KRN] SPLower=00000000 SPUpper=ffffffff [KRN] Stack usage: 8389967 bytes (0 %) [KRN] Stack in bounds [KRN] Attempt to read from address ffffffb8. [KRN] SRR0=ff806900, SRR1=0000e030 [KRN] CTR=ff8066e4 LR=ff80e698 XER=00000000 CCR=48044082 [KRN] DAR=ffffffb8 DSISR=08000000 [KRN] HASH1=070ffc00 HASH2=070003c0 IMISS=ff80e560 DMISS=ffffffb8 ICMP=800007be DCMP=800007bf [KRN] SPRG0=ff7fbc90 SPRG1=80100016 SPRG2=00000000 SPRG3=48044082 SPRG4=000048ec SPRG5=000032c0 [KRN] GPR00=00000008 GPR01=ff7ffab0 GPR02=00000000 GPR03=80100016 [KRN] GPR04=80100017 GPR05=80100013 GPR06=ff7ffb38 GPR07=80100014 [KRN] GPR08=80100010 GPR09=00000000 GPR10=80100011 GPR11=80100012 [KRN] GPR12=28044084 GPR13=7fffffff GPR14=01918f41 GPR15=ff14d170 [KRN] GPR16=ff8144f8 GPR17=00000000 GPR18=00000000 GPR19=00000000 [KRN] GPR20=00000000 GPR21=00000000 GPR22=00000000 GPR23=000048ec [KRN] GPR24=000032c0 GPR25=00000002 GPR26=000032c0 GPR27=00005fd0 [KRN] GPR28=00006000 GPR29=ff8058b0 GPR30=ff801d84 GPR31=00004f90 [KRN] Hash1 dump: [KRN] 8000000f.03ff0012 800007bf.07fff110 00000000.00000000 00000000.00000000 [KRN] 00000000.00000000 00000000.00000000 00000000.00000000 00000000.00000000 [KRN] Hash2 dump: [KRN] 80000000.0000f012 80000010.0400f012 80000780.f000002a 00000000.00000000 [KRN] 00000000.00000000 00000000.00000000 00000000.00000000 00000000.00000000 [KRN] Instruction dump: [KRN] ff806900: 8009ffb8 [KRN] ff806904: 7d234b78 [KRN] ff806908: 7c0903a6 [KRN] ff80690c: 4e800421 [KRN] ff806910: 907c0064 [KRN] ff806914: 813f0024 [KRN] ff806918: 83890064 [KRN] ff80691c: 2f9c0000 [KRN] Backtrace: [KRN] ff80e698: byte 312 in func Exec_NewAddTask, module aros-efika [KRN] ff801cf4: byte 7412 in module aros-efika [KRN] ff8140f8: byte 100 in func set_call_libfuncs, module aros-efika [KRN] ff801678: byte 376 in func Kernel_InitLib, module aros-efika [KRN] ff80ad3c: byte 136 in func Exec_InitResident, module aros-efika [KRN] ff80ac98: byte 180 in func InitResidentList, module aros-efika [KRN] ff806530: byte 1836 in func exec_main, module aros-efika [KRN] ff8025f4: byte 9716 in module aros-efika [KRN] 07800128 [KRN] CPU usage: 0.0 [KRN] CPU usage: 0.0 [KRN] CPU usage: 0.0 [KRN] CPU usage: 0.0
Posted on: 2011/3/18 20:00
|
|||
|
||||
You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.
You cannot use topic type.
You cannot use HTML syntax.
You cannot use signature.
You cannot create PDF files.
You cannot get print page.
