Browsing this Thread:
1 Anonymous Users
|
Re: Yannick's work
|
||||
|---|---|---|---|---|
|
Home away from home
 
|
With current release you can't resize the cut piece, I have it done on my side and will commit the new release soon.
Posted on: 2017/3/20 15:51
|
|||
|
||||
|
Re: Yannick's work
|
||||
|---|---|---|---|---|
|
Home away from home
|
Hi, I tried to re-size the cut piece of another picture in one tab whilst editing/adding into the new picture tab. It is possible I am resizing the new picture by mistake - since my last comment I have found that I have been doing that sometimes instead. Only realizing when I look at the ZunePaint window where the picture dimensions show. Jeff
Posted on: 2017/3/20 14:54
|
|||
|
||||
|
Re: Yannick's work
|
||||
|---|---|---|---|---|
|
Home away from home
|
Quote:
I've checked this and unfortunately I do not understand your comment. The cut piece is keeping it's size in pixels when moved over to a new tab, if this new tab is having a smaller size, the cur piece is of course looking bigger. As said I'm looking at the possibility to adjust it's size before pasting it. May be you could be more specific in what you'd expect. Thanks,
Posted on: 2017/3/20 12:21
|
|||
|
||||
|
Re: Yannick's work
|
||||
|---|---|---|---|---|
|
Home away from home
|
Keep left button down and drag the mouse, you'll see a line (or circle for radial gradients) drawn showing the gradient extend. Gradient fill function is dons once you release the mouse button.
Gradients are only available for flood fill function and shall cover the same surface as plain fill function (you can use the tolerance slider to extend the covered area to close colors)
Posted on: 2017/3/19 18:20
|
|||
|
||||
|
Re: Yannick's work
|
||||
|---|---|---|---|---|
|
Home away from home
|
Hi,
Thanks, the gradient seems to apply only the first color and not shade to the other color. What could I be doing wrong ? Jeff
Posted on: 2017/3/19 13:19
|
|||
|
||||
|
Re: Yannick's work
|
||||
|---|---|---|---|---|
|
Home away from home
|
Quote:
You have to select Gradient mode (linear/radial1/radial2) instead of plain fill mode i cycle object right to the tolerance slider, I know it's not intuitive, I'm working on it. Side note: in radial2 mode, use the mouse wheel to move the hot spot in/out from gradient center. Quote:
Yes that's by design, I will see if I can detect an empty picture and replace it if it is that case. Quote:
That could be a bug, I have to check. I was also looking at resizing the "stamp" before pasting it (maybe using the mouse wheel. Quote:
Magic wand can be added, underlying stuff is already in (mask defined by color afinity), I need to thin about how to display the selected area, and have to work on applying effect only of masked area (that's could be a bit longer) Thanks for the inputs
Posted on: 2017/3/19 8:24
|
|||
|
||||
|
Re: Yannick's work
|
||||
|---|---|---|---|---|
|
Home away from home
|
Hi
Thanks for the update, the gradient ui took a little time to get used to but okay now. The only thing I cannot do is apply the gradient to the current canvas tab. I am trying fill but it uses the single palette chosen above and not the already setup color wise gradient button. I noticed that Load picture opens that picture in a new tab but leaves the existing untitled.png tab empty. Just wondered if this was done by design ? Thanks for the tip about copying png to other tabs, works for jpg's as well. As an experiment, I cut out pieces from one picture to add them to another and some features eg resizing for example seems to use the original size as the basis of the resize rather than the existing (ie being worked on) canvas tab. So the cut-out brush gets resized massively. Hope that makes sense. Just wondered if some sort of magic wand / lasso be a possibility later ? Jeff
Posted on: 2017/3/19 7:44
Edited by jeffrey1138 on 2017/3/19 8:11:36
|
|||
|
||||
|
Re: Yannick's work
|
||||
|---|---|---|---|---|
|
Home away from home
|
Some more updates for ZunePaint:
- Completed gradient edit function - Several brush shapes can be selected - Improvement in painting modes (better behavior when going in and out of painting area) - Enabled help for text buttons (was inadvertently kept out) - Rework color reduction window and main window gadgets - Added French catalogs/UpdateCat - mcc_GradEdit.c created for gradient edition - Splitted ZunePaint.c to enhance reuse with ZuneView https://sourceforge.net/projects/zunetools/files/ZunePaint/ZunePaint_v0.6.zip/download And ZuneView: - Updated Czech catalogs - Better handling of IDCMP signals in histdisp - reworked color reduction window https://sourceforge.net/projects/zunetools/files/ZuneView/ZuneView_v0.36.zip/download
Posted on: 2017/3/18 21:50
|
|||
|
||||
|
Re: Yannick's work
|
||||
|---|---|---|---|---|
|
Home away from home
|
 Great to have on 64bit too!
Posted on: 2017/3/17 17:58
|
|||
|
p.bes
Icaros Desktop AROS distribution mantainer |
||||
|
||||
|
Re: Yannick's work
|
||||
|---|---|---|---|---|
|
Home away from home
|
I haven't reworked the ZuneFIG catalog handling yet, I've just fixed it for ABIv1 and 64bit
Posted on: 2017/3/17 16:47
|
|||
|
||||
You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.
You cannot use topic type.
You cannot use HTML syntax.
You cannot use signature.
You cannot create PDF files.
You cannot get print page.
