Re: Error linking binary - Milkytracker for AROS ABI-v0 [Development (General)]

Forum Index

Board index » Development » Development (General) » Error linking binary - Milkytracker for AROS ABI-v1

Browsing this Thread: 1 Anonymous Users

Bottom

Previous Topic

Next Topic Register To Post

« 1 2 3 4 (5)

Kalamatee

Re: Error linking binary - Milkytracker for AROS ABI-v0

Home away from home

Quote:

Marlon wrote:
Quote:

wawa wrote:
need to check if it compiles for m68k abiv1. the source is in your repo? you have an aros mmakefile too?

No, there's no mmakefile. I simply use premake4 to make the Makefiles. I have done some minor changes in my premake4.lua file to make it compile for AROS-ABIv1:

Quote:
configuration "i386-aros"
buildoptions "-O3 -fomit-frame-pointer -fno-exceptions -static-libstdc++ -s"
linkoptions { "-lpthread", "-static-libstdc++" }
includedirs { "/opt/x86-aros/bin/linux-i386/AROS/Extras/Developer/include", "/opt/x86-aros/bin/linux-x86_64/tools/crosstools/lib/gcc/i386-aros/6.3.0/include-fixed", "./src/ppui/osinterface/amiga",
"./src/ppui/osinterface/sdl-1.2", "./src/ppui/osinterface/posix" }
libdirs { "" }
defines { "AMIGA", "__AMIGA__", "AROS", "aros", "__AROS__", "__aros__" }

you could add m68k-aros as a build option with the right paths, then execute "build_gmake" to generate the Makefiles.

You could contribute to the effort by explaining how a mmakefile works and add it to the repo.

mmakefile.src's are "glorified" makefiles. They are parsed by metamake and have macros defined in our make.tmpl file expanded, to simplify writing makefiles for all the different supported AROS targets. They also do a minimal dependency tracking using the meta-targets.

A basic one that just compiles some binary from some C files (e.g. like the DClock binary someone was trying to build) would look like this ..


# Copyright ? 2018, The AROS Development Team. All rights reserved.

# $Id$



include $(SRCDIR)/config/aros.cfg



FILES   := Main Window Draw SetAlarm

EXEDIR  := $(AROS_TOOLS)



#MM- local-dclock : local-dclock-binary



%build_prog mmake=local-dclock-binary 

    progname=DClock targetdir=$(EXEDIR) 

    files=$(FILES)



%common

.. and typing "make local-dclock" in the top level AROS build directory, would make it.

Posted on: 2018/5/6 19:44

Edited by Kalamatee on 2018/5/6 20:47:52

Marlon

Re: Error linking binary - Milkytracker for AROS ABI-v0

Not too shy to talk

Quote:

wawa wrote:
need to check if it compiles for m68k abiv1. the source is in your repo? you have an aros mmakefile too?

No, there's no mmakefile. I simply use premake4 to make the Makefiles. I have done some minor changes in my premake4.lua file to make it compile for AROS-ABIv1:

Quote:

configuration "i386-aros"
buildoptions "-O3 -fomit-frame-pointer -fno-exceptions -static-libstdc++ -s"
linkoptions { "-lpthread", "-static-libstdc++" }
includedirs { "/opt/x86-aros/bin/linux-i386/AROS/Extras/Developer/include", "/opt/x86-aros/bin/linux-x86_64/tools/crosstools/lib/gcc/i386-aros/6.3.0/include-fixed", "./src/ppui/osinterface/amiga",
"./src/ppui/osinterface/sdl-1.2", "./src/ppui/osinterface/posix" }
libdirs { "" }
defines { "AMIGA", "__AMIGA__", "AROS", "aros", "__AROS__", "__aros__" }

you could add m68k-aros as a build option with the right paths, then execute "build_gmake" to generate the Makefiles.

You could contribute to the effort by explaining how a mmakefile works and add it to the repo.

Posted on: 2018/5/6 15:05

wawa

Re: Error linking binary - Milkytracker for AROS ABI-v0

Home away from home

need to check if it compiles for m68k abiv1. the source is in your repo? you have an aros mmakefile too?

Posted on: 2018/5/6 14:57

Marlon

Re: Error linking binary - Milkytracker for AROS ABI-v0

Not too shy to talk

It links without issue now! Thank you!

Binary available here:https://www.eevul.net/amiga/ports/milkytracker/

Posted on: 2018/5/6 12:32

Marlon

Re: Error linking binary - Milkytracker for AROS ABI-v0

Not too shy to talk

Quote:

ncafferkey wrote:
Have you built it this way successfully in the past? It might be easier to build within hosted AROS or with the SDK.

No, this is the first time trying. :)

I already have a setup for AmigaOS 3.x, AmigaOS 4.x and MorphOS, and I'd prefer to do everything the same way.

I just followed Wawa's guide in this thread:http://aros-exec.org/modules/newbb/viewtopic.php?topic_id=10828

Quote:

Kalamatee wrote:
Quote:

Marlon wrote:
It currently builds fine but I get the following error:
[QUOTE]==== Building milkytracker (release_i386-aros) ====
Linking milkytracker
There are undefined symbols in '../bin/milkytracker':
U pthread_cond_broadcast /opt/x86-aros/bin/linux-x86_64/gen/host/tools/crosstools/gcc/i386-aros/libstdc++-v3/include/i386-aros/bits/gthr-default.h:852
U pthread_cond_wait /opt/x86-aros/bin/linux-x86_64/gen/host/tools/crosstools/gcc/i386-aros/libstdc++-v3/include/i386-aros/bits/gthr-default.h:864
U pthread_getspecific /opt/x86-aros/bin/linux-x86_64/gen/host/tools/crosstools/gcc/i386-aros/libstdc++-v3/include/i386-aros/bits/gthr-default.h:719
U pthread_key_create /opt/x86-aros/bin/linux-x86_64/gen/host/tools/crosstools/gcc/i386-aros/libstdc++-v3/include/i386-aros/bits/gthr-default.h:707
U pthread_key_delete /opt/x86-aros/bin/linux-x86_64/gen/host/tools/crosstools/gcc/i386-aros/libstdc++-v3/include/i386-aros/bits/gthr-default.h:713
U pthread_mutex_lock /opt/x86-aros/bin/linux-x86_64/gen/host/tools/crosstools/gcc/i386-aros/libgcc/./gthr-default.h:748
U pthread_mutex_unlock /opt/x86-aros/bin/linux-x86_64/gen/host/tools/crosstools/gcc/i386-aros/libgcc/./gthr-default.h:778
U pthread_once /opt/x86-aros/bin/linux-x86_64/gen/host/tools/crosstools/gcc/i386-aros/libgcc/./gthr-default.h:699
U pthread_setspecific /opt/x86-aros/bin/linux-x86_64/gen/host/tools/crosstools/gcc/i386-aros/libstdc++-v3/include/i386-aros/bits/gthr-default.h:725
make[1]: *** [milkytracker.make:501: ../bin/milkytracker] Error 1
make: *** [Makefile:49: milkytracker] Error 2[/QUOTE]

What's up with that? I built AROS from the svn repo,

If you are building trunk, then it is ABI v1. A couple of details in your output suggest this is the case.

Quote:

and I'm using my source I've used for the ports to AmigaOS 3.x, AmigaOS 4.x and MorphOS:https://github.com/AmigaPorts/MilkyTracker

You need to add -static-libstdc++

Didn't realize that was ABI-v1. The (very dated) website (aros.org) is very confusing regarding this matter. I'd suggest a total revamp of the site, but I know there's very few devs.

I'd help with such a task if I wasn't already swamped with other projects already.

And thanks for letting me know about -static-libstdc++ :)

Posted on: 2018/5/6 12:22

ncafferkey

Re: Error linking binary - Milkytracker for AROS ABI-v0

Home away from home

Have you built it this way successfully in the past? It might be easier to build within hosted AROS or with the SDK.

Posted on: 2018/5/6 1:46

Kalamatee

Re: Error linking binary - Milkytracker for AROS ABI-v0

Home away from home

Quote:

Marlon wrote:
It currently builds fine but I get the following error:
[QUOTE]==== Building milkytracker (release_i386-aros) ====
Linking milkytracker
There are undefined symbols in '../bin/milkytracker':
U pthread_cond_broadcast /opt/x86-aros/bin/linux-x86_64/gen/host/tools/crosstools/gcc/i386-aros/libstdc++-v3/include/i386-aros/bits/gthr-default.h:852
U pthread_cond_wait /opt/x86-aros/bin/linux-x86_64/gen/host/tools/crosstools/gcc/i386-aros/libstdc++-v3/include/i386-aros/bits/gthr-default.h:864
U pthread_getspecific /opt/x86-aros/bin/linux-x86_64/gen/host/tools/crosstools/gcc/i386-aros/libstdc++-v3/include/i386-aros/bits/gthr-default.h:719
U pthread_key_create /opt/x86-aros/bin/linux-x86_64/gen/host/tools/crosstools/gcc/i386-aros/libstdc++-v3/include/i386-aros/bits/gthr-default.h:707
U pthread_key_delete /opt/x86-aros/bin/linux-x86_64/gen/host/tools/crosstools/gcc/i386-aros/libstdc++-v3/include/i386-aros/bits/gthr-default.h:713
U pthread_mutex_lock /opt/x86-aros/bin/linux-x86_64/gen/host/tools/crosstools/gcc/i386-aros/libgcc/./gthr-default.h:748
U pthread_mutex_unlock /opt/x86-aros/bin/linux-x86_64/gen/host/tools/crosstools/gcc/i386-aros/libgcc/./gthr-default.h:778
U pthread_once /opt/x86-aros/bin/linux-x86_64/gen/host/tools/crosstools/gcc/i386-aros/libgcc/./gthr-default.h:699
U pthread_setspecific /opt/x86-aros/bin/linux-x86_64/gen/host/tools/crosstools/gcc/i386-aros/libstdc++-v3/include/i386-aros/bits/gthr-default.h:725
make[1]: *** [milkytracker.make:501: ../bin/milkytracker] Error 1
make: *** [Makefile:49: milkytracker] Error 2[/QUOTE]

What's up with that? I built AROS from the svn repo,

If you are building trunk, then it is ABI v1. A couple of details in your output suggest this is the case.

Quote:

and I'm using my source I've used for the ports to AmigaOS 3.x, AmigaOS 4.x and MorphOS:https://github.com/AmigaPorts/MilkyTracker

You need to add -static-libstdc++

Posted on: 2018/5/6 1:43

Edited by Kalamatee on 2018/5/6 3:11:48

Mysha

Re: Error linking binary - Milkytracker for AROS ABI-v0

Quite a regular

What part is building fine, then?

Mysha

Posted on: 2018/5/5 23:13

Mysha

Marlon

Error linking binary - Milkytracker for AROS ABI-v1

Not too shy to talk

It currently builds fine but I get the following error:
Quote:

==== Building milkytracker (release_i386-aros) ====
Linking milkytracker
There are undefined symbols in '../bin/milkytracker':
U pthread_cond_broadcast /opt/x86-aros/bin/linux-x86_64/gen/host/tools/crosstools/gcc/i386-aros/libstdc++-v3/include/i386-aros/bits/gthr-default.h:852
U pthread_cond_wait /opt/x86-aros/bin/linux-x86_64/gen/host/tools/crosstools/gcc/i386-aros/libstdc++-v3/include/i386-aros/bits/gthr-default.h:864
U pthread_getspecific /opt/x86-aros/bin/linux-x86_64/gen/host/tools/crosstools/gcc/i386-aros/libstdc++-v3/include/i386-aros/bits/gthr-default.h:719
U pthread_key_create /opt/x86-aros/bin/linux-x86_64/gen/host/tools/crosstools/gcc/i386-aros/libstdc++-v3/include/i386-aros/bits/gthr-default.h:707
U pthread_key_delete /opt/x86-aros/bin/linux-x86_64/gen/host/tools/crosstools/gcc/i386-aros/libstdc++-v3/include/i386-aros/bits/gthr-default.h:713
U pthread_mutex_lock /opt/x86-aros/bin/linux-x86_64/gen/host/tools/crosstools/gcc/i386-aros/libgcc/./gthr-default.h:748
U pthread_mutex_unlock /opt/x86-aros/bin/linux-x86_64/gen/host/tools/crosstools/gcc/i386-aros/libgcc/./gthr-default.h:778
U pthread_once /opt/x86-aros/bin/linux-x86_64/gen/host/tools/crosstools/gcc/i386-aros/libgcc/./gthr-default.h:699
U pthread_setspecific /opt/x86-aros/bin/linux-x86_64/gen/host/tools/crosstools/gcc/i386-aros/libstdc++-v3/include/i386-aros/bits/gthr-default.h:725
make[1]: *** [milkytracker.make:501: ../bin/milkytracker] Error 1
make: *** [Makefile:49: milkytracker] Error 2

What's up with that? I built AROS from the svn repo, and I'm using my source I've used for the ports to AmigaOS 3.x, AmigaOS 4.x and MorphOS:https://github.com/AmigaPorts/MilkyTracker

Posted on: 2018/5/5 16:18

Edited by Marlon on 2018/5/6 12:33:29