Re: Poseidon for AROS? [Bounty Wishlist]

Forum Index

Board index » Miscellaneous Forums » Bounty Wishlist » Poseidon for AROS?

Browsing this Thread: 1 Anonymous Users

Bottom

Previous Topic

Next Topic Register To Post

« 1 2 (3) 4 5 6 ... 34 »

Colani1200

Re: Poseidon for AROS?

#320

Home away from home

Test result Epson Stylus D68:


1:56 Nachm.|  0-poseidon.library: Device 'USB Printer' says it is currently bus-powered. Fixing config.

1:56 Nachm.|  0-hub.class: New device 'USB Printer' at port 1. Very nice.

1:56 Nachm.|  0-printer.class: Please welcome 'USB Printer' to the family at usbparallel.device unit 0!

1:56 Nachm.|  5-printer.class: GET_DEVICE_ID (len 19968) failed: endpoint stall (4)

Posted on: 2009/7/19 12:12

[size=xx-small]My AROS native boxes:
- ASUS P4PE-X/TE, P4 2.8, SB Live! SB0060, RTL8029, GeForce 5200
- HP Compaq NX7010
[/size]

Colani1200

Re: Poseidon for AROS?

#319

Home away from home

Quote:

platon42 wrote:

Without PsdDevlister I cannot tell why the Midi part wouldn't be bound.

I can test further if you tell me what to do.

Quote:

The problem with the AHI mode is also explained in the error log: AHI does only support audio output (playback) with optional input (recording), but not recording without an playback mode of the same type. It looks like your devices does only support recording and no playback.

While you can indeed switch this device into a recording only mode, this was not the case. I checked again, it was set to a 16 bit 48 kHz in/out mode and it does not appear in AHI.

Posted on: 2009/7/19 12:10

[size=xx-small]My AROS native boxes:
- ASUS P4PE-X/TE, P4 2.8, SB Live! SB0060, RTL8029, GeForce 5200
- HP Compaq NX7010
[/size]

platon42

Re: Poseidon for AROS?

#318

Just can't stay away

Quote:

Colani1200 wrote:

Looks quite promising, the MIDI part of the device is not seen though and the audio part does not show up in AHI.

Without PsdDevlister I cannot tell why the Midi part wouldn't be bound. The problem with the AHI mode is also explained in the error log: AHI does only support audio output (playback) with optional input (recording), but not recording without an playback mode of the same type. It looks like your devices does only support recording and no playback. That's why there's no AHI mode generated.

Posted on: 2009/7/18 23:26

Colani1200

Re: Poseidon for AROS?

#317

Home away from home

Quote:

Steril707 wrote:

Wut?? Does that mean that USB-Midi Controllers work already (given that we would have anything to control ;) )?

I'd say yes. So you better get that audio app up and running.

Posted on: 2009/7/18 19:40

[size=xx-small]My AROS native boxes:
- ASUS P4PE-X/TE, P4 2.8, SB Live! SB0060, RTL8029, GeForce 5200
- HP Compaq NX7010
[/size]

Steril707

Re: Poseidon for AROS?

#316

Home away from home

Quote:

Colani1200 wrote:
Test result Evolution U-Control UC-16 (MIDI Controller): recognized
9:40 Nachm.| 0-poseidon.library: Device 'UC-16 USB MIDI Controller' says it is currently bus-powered. Fixing config. 9:40 Nachm.| 0-hub.class: New device 'UC-16 USB MIDI Controller' at port 2. Very nice. 9:40 Nachm.| 0-camdusbmidi.class: Play it again, 'UC-16 USB MIDI Controller'! 9:40 Nachm.| 0-camdusbmidi.class: Generated CAMD MIDI driver 'DEVS:Midi/UC16USBMIDIController'! 9:40 Nachm.| 10-PoPo: Could not load soundfile 'SYS:Prefs/Presets/Poseidon/Connect.iff'.

Wut?? Does that mean that USB-Midi Controllers work already (given that we would have anything to control ;) )?

Posted on: 2009/7/18 16:19

Colani1200

Re: Poseidon for AROS?

#315

Home away from home

Test result Terratec Phase26 USB:


9:45 Nachm.|  0-poseidon.library: Device 'PHASE 26 USB(ASIO)' says it is currently bus-powered. Fixing config.

9:45 Nachm.|  0-hub.class: New device 'PHASE 26 USB(ASIO)' at port 2. Very nice.

9:45 Nachm.|  0-usbaudio.class: Terminal 01 (1 delay) of Format signed PCM

9:45 Nachm.|  5-usbaudio.class: Unsupported mode 'signed PCM' with 16 bits x 6 channels ignored.

9:45 Nachm.|  0-usbaudio.class: Terminal 06 (1 delay) of Format signed PCM

9:45 Nachm.|  0-usbaudio.class: Found mode with 2 channel(s) (2 byte(s) per frame) and 16 bits

9:45 Nachm.|  5-usbaudio.class: Recording mode with 2 channel(s) and 16 bits could not be matched to an output mode.

9:45 Nachm.|  0-usbaudio.class: Play it again, 'PHASE 26 USB(ASIO)'!

switching from ASIO to normal mode on the front panel of the device:


9:48 Nachm.|  0-hub.class: Device 'PHASE 26 USB(ASIO)' at port 2 is gone!

9:48 Nachm.|  0-usbaudio.class: 'PHASE 26 USB(ASIO)' fell silent!

9:48 Nachm.|  0-poseidon.library: Device 'PHASE 26 USB(16/48)' says it is currently bus-powered. Fixing config.

9:48 Nachm.|  0-hub.class: New device 'PHASE 26 USB(16/48)' at port 2. Very nice.

9:48 Nachm.|  0-usbaudio.class: Terminal 01 (1 delay) of Format signed PCM

9:48 Nachm.|  5-usbaudio.class: Unsupported mode 'signed PCM' with 16 bits x 6 channels ignored.

9:48 Nachm.|  0-usbaudio.class: Terminal 06 (1 delay) of Format signed PCM

9:48 Nachm.|  0-usbaudio.class: Found mode with 2 channel(s) (2 byte(s) per frame) and 16 bits

9:48 Nachm.|  5-usbaudio.class: Recording mode with 2 channel(s) and 16 bits could not be matched to an output mode.

9:48 Nachm.|  0-usbaudio.class: Play it again, 'PHASE 26 USB(16/48)'!

Looks quite promising, the MIDI part of the device is not seen though and the audio part does not show up in AHI.

Posted on: 2009/7/17 20:06

[size=xx-small]My AROS native boxes:
- ASUS P4PE-X/TE, P4 2.8, SB Live! SB0060, RTL8029, GeForce 5200
- HP Compaq NX7010
[/size]

Colani1200

Re: Poseidon for AROS?

#314

Home away from home

Test result Evolution U-Control UC-16 (MIDI Controller): recognized


9:40 Nachm.|  0-poseidon.library: Device 'UC-16 USB MIDI Controller' says it is currently bus-powered. Fixing config.

9:40 Nachm.|  0-hub.class: New device 'UC-16 USB MIDI Controller' at port 2. Very nice.

9:40 Nachm.|  0-camdusbmidi.class: Play it again, 'UC-16 USB MIDI Controller'!

9:40 Nachm.|  0-camdusbmidi.class: Generated CAMD MIDI driver 'DEVS:Midi/UC16USBMIDIController'!

9:40 Nachm.| 10-PoPo: Could not load soundfile 'SYS:Prefs/Presets/Poseidon/Connect.iff'.

Posted on: 2009/7/17 19:55

[size=xx-small]My AROS native boxes:
- ASUS P4PE-X/TE, P4 2.8, SB Live! SB0060, RTL8029, GeForce 5200
- HP Compaq NX7010
[/size]

Colani1200

Re: Poseidon for AROS?

#313

Home away from home

Test result K610i: No reaction at all.

Posted on: 2009/7/17 19:50

[size=xx-small]My AROS native boxes:
- ASUS P4PE-X/TE, P4 2.8, SB Live! SB0060, RTL8029, GeForce 5200
- HP Compaq NX7010
[/size]

Colani1200

Re: Poseidon for AROS?

#312

Home away from home

Tested some stuff so far. Apart from what already has been said here before, I have test results from my Sony Ericsson C902.

In mass storage mode:


9:14 Nachm.|  0-hub.class: New device 'Memory Stick' at port 2. Very nice.

9:14 Nachm.|  0-massstorage.class: Postconfig patchflags 0x0342 ModeXLate FixInq36 SimpleSCSI NoReset.

9:14 Nachm.|  0-massstorage.class: MSD 'Memory Stick' LUN 0 available through usbscsi.device unit 0!

9:14 Nachm.|  0-massstorage.class: Postconfig patchflags 0x0342 ModeXLate FixInq36 SimpleSCSI NoReset.

9:14 Nachm.|  0-massstorage.class: MSD 'Memory Stick' LUN 1 available through usbscsi.device unit 1!

9:14 Nachm.| 10-PoPo: Could not load soundfile 'SYS:Prefs/Presets/Poseidon/Connect.iff'.

9:14 Nachm.|  0-massstorage.class: Device 'Memory Stick' is of Direct Access type.

9:14 Nachm.|  0-massstorage.class: Removable Task started.

9:14 Nachm.|  0-massstorage.class: Device 'Memory Stick' is of Direct Access type.

9:14 Nachm.|  0-massstorage.class: Partition 0 is (probably) FAT formatted!

9:14 Nachm.|  5-massstorage.class: Loading filesystem fat.handler from RDB failed. Trying DOS...

9:14 Nachm.| 10-massstorage.class: Loading filesystem fat.handler via DOS failed!

9:14 Nachm.|  0-massstorage.class: Experimental AROS patch to load fat.handler

9:14 Nachm.|  0-massstorage.class: Mounted usbscsi.device unit 0 as UMSD:

9:14 Nachm.|  0-massstorage.class: Partition 0 is (probably) FAT formatted!

9:14 Nachm.|  5-massstorage.class: Loading filesystem fat.handler from RDB failed. Trying DOS...

9:14 Nachm.| 10-massstorage.class: Loading filesystem fat.handler via DOS failed!

9:14 Nachm.|  0-massstorage.class: Experimental AROS patch to load fat.handler

9:14 Nachm.|  0-massstorage.class: Mounted usbscsi.device unit 1 as UMSD.0:

Well this actually really looks good so far. Both the internal memory and the memory stick in the device are recognized and trident claims they are mounted. Unfortunately I cannot access them.

I tried "media transfer mode":


9:16 Nachm.|  0-hub.class: New device 'C902' at port 2. Very nice.

9:16 Nachm.|  0-ptp.class: Hold still for images from for 'C902'!

9:16 Nachm.|  0-ptp.class: Model 'C902' by 'Sony Ericsson'.

9:16 Nachm.|  0-ptp.class: Camera Version '1.20', Serial '00000000000000000xxxxxx'.

the "info" command freezes the machine.

"telephone mode":


9:09 Nachm.|  0-hub.class: New device 'Sony Ericsson C902' at port 2. Very nice.

9:09 Nachm.| 10-PoPo: Could not load soundfile 'SYS:Prefs/Presets/Poseidon/Connect.iff'.

9:09 Nachm.|  0-cdcacm.class: Using data interface 2.

9:09 Nachm.|  0-cdcacm.class: Mode(m) mess 'Sony Ericsson C902' at usbmodem.device unit 0!

9:09 Nachm.|  0-cdcacm.class: Using data interface 4.

9:09 Nachm.|  0-cdcacm.class: Mode(m) mess 'Sony Ericsson C902' at usbmodem.device unit 1!

9:09 Nachm.|  0-cdcacm.class: Using data interface 6.

9:09 Nachm.|  0-cdcacm.class: OBject EXchange (OBEX) 'Sony Ericsson C902' at usbmodem.device unit 2!

9:09 Nachm.|  0-ptp.class: Hold still for images from for 'Sony Ericsson C902'!

9:09 Nachm.|  0-ptp.class: Model 'C902' by 'Sony Ericsson'.

9:09 Nachm.|  0-ptp.class: Camera Version '1.20', Serial '00000000000000000xxxx'.

Again, freezes when running "info".

Posted on: 2009/7/17 19:44

[size=xx-small]My AROS native boxes:
- ASUS P4PE-X/TE, P4 2.8, SB Live! SB0060, RTL8029, GeForce 5200
- HP Compaq NX7010
[/size]

demether

Re: Poseidon for AROS?

#311

Home away from home

I just live updated Icaros, reboot the computer, changed anything on BIOS( usb2 and usb enabled, usb legacy disabled)... BUT everything works now !!!

peripherals !

My classy white 1000dpi mouse : OK
my keyboard : OK
wingman joypad : OK
my USB MIDI controller (kontrol DJ pro) : OK (now someone HAS to create a driver and dj-live music software for it ;) )
camera : OK

massstorage :

2.0 card reader : OK
USB 2.0 stick : OK

Well, everything is recognized, on internal port and rear port of the computer.

For USB stick, automount is working. When I plug it, and then, boot the computer, a floppy disk icon appears when workbench appears.

If I unplug it, the icon disapears. IF I plug it again, the automount works, but now the icon is an harddrive (like aros and work icon). Little issue : the icon appears 2 times (= I can see 2 icons on the workbench screen). If I unplug it, and plug it again, 3 icons appears, unplug and plug again, 4icons, etc, etc...

For usb stick speed : in trident it 's named "usb flash memory", with "speed: high".

For transfering from USB stick to work : 640Kbytes/s
transfering from work to USB stick : 16kbytes/s

Last issue : card reader is recognized, but if I plug a SD card for example, nothing is mounted. I guess it's normal ?

Posted on: 2009/7/15 22:19